A380 Tail Fin Camera / Laser
Tech Log - PPRuNe Forums
Lurking in the depths of this video:
I've been working on installing the trail wheel on my Pitts S1C. I have two tail wheel springs. A used one and a new one I purchased from Aviat. The used one fits the airplane beautifully. The one from Aviat does not fit very well though I could make some parts so that it did. I like the used spr...
A380 wagging its tail
A380 landing with just a little bit of yaw oscillation.The back seaters must have had a nice ride, there."An Emirates spokesman said: 'Emirates flight EK 55 on 5 October 2017 landed safely in Dusseldorf under strong crosswind conditions. At no point was the safety of the passengers and cr...
Built in camera's.
I hope this is the correct page to be posting but here goes. I want to build-in a micro camera at the top of the fin on my Thruster, rather than have drag and installation/removal problems of a Go-Pro or similar camera. Can anyone recommend a suitable, tried and tested camera of the lipstick ty...
Morons Point Laser At News Chopper
Another laser incident caught on camera
Mounting a Go Pro camera
I have been searching the web to see how folks mount a Go Pro on the tail of an Acrosport or similar biplane. Now that I have flown the 40 hours off I'm starting to do some minor adjustments and it is time to mount a camera so I can better critique my aerobatics. I'm still heavy handed with it ...
Gap seals on tail surfaces
Hi all,I noticed a previous owner of my S1 tried to glue the gap seals to the stab an fin. I'm about to reinstall them without any glue. Has anybody glued their gap seals and if so why?Thanks,-Dimitri
Read responses in pprune.org